Figure 208 after dial terminal – Raritan Engineering Command Center CC-SG User Manual
Page 187
Advertising
C
HAPTER
12:
ADVANCED ADMINISTRATION
171
7. If Show terminal window was checked as described in section Configure the Call-back
Connection earlier in this chapter, then a window similar to the one below will be displayed:
Figure 208 After Dial Terminal
8. Wait 1 or 2 minutes and in a supported browser, enter the IP address of CC-SG that was
configured as the Server address under the Modem tab in Configuration Manager on CC-
SG and login to CC-SG.
Advertising