Raritan Engineering Command Center CC-SG - Manual (Page 49)

C HAPTER 3: E XAMPLE C ONFIGURATION W ORKFLOW 33
6. Click OK to add the policy or policies to the group. A Group Policies Updated successfully
message confirms that policies have been updated.
7. Repeat steps 1 through 6 to edit other groups’ policies.
Add Users to User Group
You now need to add users or drag and drop an existing user to the user group that has just been
assigned a policy. These users will then be able to login to the CC-SG and have access or be
denied access to the ports as specified in the policy.
1. Click on the Users tab and select the user group you wish to add the user to.
2. On the User menu, click Add User. Alternatively, right-click on a user and select Add User.
The Add User screen appears.
Figure 34 Add User Screen
3. Type the user’s name in the Username field (1-32 characters, alphanumeric characters or
underscores, no spaces).
4. Check the Remote Authentication check box only if the user should be authenticated by
TACACS+, RADIUS, LDAP, or AD. Note: Checking the Remote Authentication box
implies that a remote server is being used for authentication. If so, a local password is not
needed and the Password and Retype Password fields are grayed out.
5. If using local authentication, type the new password into the Password field (6-16 characters,
alphanumeric characters and underscores).
6. If using local authentication, re-type password in Retype Password field.
7. Type a dial back number in the Dial Back Number field, if needed.
8. Check the Login Enabled check box to authenticate against the system (if not, user cannot
enter the system).
9. Check the Force Change Password on Next Login check box if you want this user to be
forced to change password the next time he or she logs in to CC-SG.
10. Check the Force Change Password Periodically check box if you want this user to have to
change his or her password from time to time.
11. Type the expiration period for this user’s password in the Expiration Period field.