Ricoh JP8000 - Manual (Page 37)

Printing Preparations
17
1
When you use standard paper
(47.1 g/m
2 to 105 g/m 2 , 12.5 lb to
28 lb)
A Adjust the side plates to match
the paper size scale on the end
plate side.
C
Lower or lift the paper alignment
wings by turning the left and
right knobs.
Note
❒ When the guides are up, you
might not be able to load the
u nit to full capacity (1,000
sheets) depending on the paper
you are using.
❒ Lift the paper alignment wings
when B5
L prints are curled.
When you use 81.4 g/m 2 , 21.6 lb
or thicker paper
A Lower the paper alignment
wings.
When you use 81.4 g/m 2 , 21.6 lb
or thinner and B5 or smaller
paper
A Lower the paper alignment
wings.
When you use 81.4 g/m 2 , 21.6 lb
or thinner and A4, 8 1 /
2
× 11" or
larger paper
A Lift the paper alignment wings.
When you use A4, 8 1 /
2
"
× 11"
KL paper
A Swing out the guides as shown
in the illustration.
D
Turn on the main switch.
Note
❒ You can have the machine dis-
play how much ink and master
are left when you switch it on.
See “User Tools—Ink/Master
Left” in
⇒ P.142 “4. Mode Set-
ting”.
ZDZY020E
TPEH021E