Adjusting the image density of prints, Before making a master, After making a master – Ricoh JP8000 User Manual
Page 44: P.24 “ad, Justing the image density of prints, P.24 “adjusting the image density of prints, Before making a master after making a master, P.24, 1adjusting the image density of prints
Operation
24
1
Adjusting the Image Density of Prints
There are two ways to adjust the im-
age density of prints:
❖
❖
❖
❖ Before making a master
Use the
{Image Density} key.
❖
❖
❖
❖ After making a master
Use the
{W
W
W
W}{V
V
V
V} (Speed) keys.
Before Making a Master
A
Press the
{{{{Image Density}}}} key to
adjust the image density.
B
Press the
{{{{Start}}}} key.
After Making a Master
A
To increase the image density,
press the
{{{{W
W
W
W}}}} key. To reduce the
image density, press the
{{{{V
V
V
V}}}} key.
Note
❒ The faster the printing speed be-
comes, the lighter the printing
density is. If you want darker
prints, decrease the printing
speed.
Skip Feed
Edge Erase
Over lay
Make-Up
Stamp
Image Density
Lighter
Darker 2
Darker 1
Normal
Economy Mode
Original Storage
Job Separator
Auto On Line
On Line
ZDZS010N