Ricoh JP8000 - Manual (Page 396)

User Tools
148
4
10 Cancel Comb. Specifies whether Combine Originals or Memory Combine mode
is cleared after finishing your print job.
Note
❒ Default: Not to cancel
11 No. of Skip Feed Specifies the number of drum rotations in Skip Feed mode at
power on. You can also select whether you can change the num-
ber of drum rotations temporarily when you press the
{{{{Skip Feed}}}}
key. See p.71 “Skip Feed Printing”.
Note
❒ Default:
• Panel display: Display
• Number of Skip Feed: 2
Reference
For changing the number of rotations, see p.159 “4-11 No. of
Skip Feed”.
12 Idling for Q.start When you use the Manual Quality Start mode, you can select
how many times the drum unit idles.
Note
❒ Default: 7
13 Setting Q.start If the machine is not used for a long period of time, the ink on the
drum might dry causing image quality to deteriorate. The Auto
Quality Start mode automatically recovers image density quality
after a selected time has passed. If Auto Quality Start mode is set
to “Not to use”, you can regain print quality by making a few ex-
tra prints or you can use the Manual Quality Start mode.
Note
❒ Default:
• Before print: Yes
• After print: Yes
14 No. of Q.start You can select how many times the drum unit idles after the dis-
played time periods have passed in Auto Quality Start mode.
Note
❒ Default: See p.160 “4-14 No. of Q.start”.
❒ To increase the print image density, increase the number of
drum rotations, and vice versa.
Reference
For changing the number of idle spins, see p.160 “4-14 No. of
Q.start”.
No. Mode Description