Ricoh JP8000 - Manual (Page 57)

Directional Magnification (Size)
37
1
Directional Magnification (Size)
Use this function to have the machine
select suitable reproduction ratios
based upon the dimensions of the
print you require, and the size of the
original you specify.
1. Horizontal original size
2. Vertical original size
3. Horizontal print size
4. Vertical print size
Note
❒ You can enter the sizes within the
following ranges:
❒ The range of ratios from which the
machine can select depends on
where you place the original:
• On the exposure glass: 50-200%
❒ If the calculated ratio is over the
maximum or under the minimum
ratio, it is corrected within the
range of the ratio automatically.
A
Press the [Ratio] key.
B
Select [Mag.] with the [
→ → → →] or {{{{} } } }}}}}
key.
C
Press the [OK] key.
D
Select [Direct.Mag.(Size)] with the
[
→ → → →] or {{{{} } } }}}}} key.
E
Press the [OK] key.
Metric ver-
sion 1 - 999mm (in 1mm steps)
Inch version 0.1" - 99.9" (in 0.1" steps)
1
3
2 4
CP2M01EE