Ricoh JP8000 - Manual (Page 423)

x Clearing Misfeeds
175
5
x x x x Clearing Misfeeds
R CAUTION:
Note
❒ After clearing misfeeds, make sure
that all the doors, covers, and units
are closed and the
x x x x indicator is
off.
❒ To prevent misfeeds, do not leave
any torn scraps of paper, originals,
or masters in the machine.
❒ When clearing misfeeds, do not
turn off the main switch. If you do,
your print settings will be cleared.
❒ If misfeeds occur repeatedly,
please contact your service repre-
sentative.
”
x x x x + A” Paper Misfeeds in the
Paper Feed Section
AAAA
Remove the misfed paper.
- - - -To prevent paper misfeeds:
Check the following before restarting
the printing run.
• Did you select an appropriate pa-
per type with the [Ppr.Type] key?
• Are the side pads in the correct po-
sitions?
To print on thin paper (47.1g/m 2 ,
12.5 lb), slide the levers behind the
paper feed side plates in the direc-
tion of the arrow (see illustration).
• When paper is curled, correct as
shown.
• Be careful not to cut yourself on
any sharp edges when you reach
inside the machine to remove
misfed sheets of paper or mas-
ters.
ZDCY140E
Z066