Ricoh JP8000 - Manual (Page 63)

Printing onto Various Kinds of Paper
43
1
- - - -To prevent paper misfeeds:
If paper misfeeds occur frequently,
even if you select a suitable paper
type, follow the steps below.
A Press the [Select] key.
B Select the type of paper misfeed
and frequency with the
{~}, {}},
{|}, or {{} keys.
C Press the [OK] key.
If paper misfeeds occur frequently in
the paper exit section, even if you use
standard or thin paper and select the
[Std.]
, do the following:
A Set the wing guide to the “Down”
position with the user tools. See
“Deflector Angle”
⇒ P.142 “4.
Mode Setting”.
If A4 – B5, 8 1 /
2
"
× 11" thick paper is
not delivered properly to the paper
delivery tray, do the following:
A Set the wing guide to the “Up” po-
sition with the user tools. See “De-
flector Angle”
⇒ P.142 “4. Mode
Setting”.