Standard printing, P.19 “standard printing, 1standard printing – Ricoh JP8000 User Manual
Page 39
Advertising
Standard Printing
19
1
Standard Printing
A
Make sure that the machine is
ready for printing.
B
If user codes are turned on, enter
your user code with the number
keys, and then press the
{{{{q
q
q
q}}}} key.
Reference
⇒ P.18 “Entering a User Code to
Use the Machine”
C
Make sure that there are no previ-
ous settings remaining.
Note
❒ To clear any previous settings,
press the
{Clear Modes/Energy
Saver
} key.
D
Lift the platen cover.
Note
❒ Be sure to lift the platen cover
more than 30cm, 12".
E
Place the original face down on
the exposure glass. The original
should be aligned to the rear left
corner.
F
Lower the platen cover.
G
Make your desired settings.
H
Press the
{{{{Start}}}} key.
A trial print is delivered to the pa-
per delivery tray.
TPEH010E
ZDCH110E
Advertising