Ricoh JP8000 - Manual (Page 88)

Operation
68
1
Skip Feed Printing
You can increase the time between
prints using the
{Skip Feed} key. By
default, when one sheet of paper is
fed, the drum rotates twice. However,
you can select the number of drum ro-
tations. This gives you a chance to re-
move prints one by one from the
paper delivery tray or insert one sheet
of paper between two prints. If you
use this function, you can also use pa-
per longer than 432mm, 17.0" in spite
of the maximum length limitations of
paper.
Note
❒ For every sheet of paper fed, the
drum rotations twice by default.
You can change this default setting
with the user tools. See “No. of
Skip Feed”
⇒ P.142 “4. Mode Set-
ting”.
❒ The maximum length of paper in
Skip Feed mode is 460mm, 18.1".
❒ When you use paper longer than
432mm, 17.0", prints will not be de-
livered to the paper delivery tray
properly, so lower the paper deliv-
ery end plate and take the prints by
hand.
A
Place your original on the expo-
sure glass or in the optional docu-
ment feeder.
B
Press the
{{{{Skip Feed}}}} key.
C
If necessary select the number of
drum rotations per sheet of paper
fed with the [
← ← ← ←] [→ → → →] or {{{{~ ~ ~ ~}}}} {{{{} } } }}}}}
keys.
Note
❒ You can also select the number
of rotations with the number
keys.
❒ You can select from 2 to 9 rota-
tions.
❒ By default, the machine asks
you to confirm the number of
rotations. You can have this step
omitted by adjusting the user
tool settings. See “No. of Skip
Feed”
⇒ P.142 “4. Mode Set-
ting”.
D
Press the [OK] key.
E
Press the
{{{{Start}}}} key.
Skip Feed Edge Erase
Over lay
Make-Up
Stamp
Image Density
Lighter
Darker 2
Darker 1
Normal
Economy Mode
Original Storage Job Separator
Auto On Line
On Line
ZDZS030N