Ricoh FAX2050L - Manual (Page 111)

Printing Options
31
4
Printing Options
As printing options, the Reverse Or-
der Printing, and Printing the Center
Mark are available.
Reverse Order Printing
Normally, the machine prints the
pages of received messages in the or-
der that they were received uncollat-
ed.
However, with Reverse Order Print-
ing, the machine will collate the se-
quence by printing the message from
the last page first collated. This will
make it easier to distribute the re-
ceived fax messages, and make read-
ing them more convenient.
Preparation
Reverse Order Printing will not
take place unless you switch it on
beforehand.
To switch this feature on or off, see
the User parameters. (see P.58 “User
Parameters”(Switch 10 Bit 0)).
Center Mark
If you switch this feature on, 2 marks
at the center-top and center-left are
printed on incoming fax messages.
This makes it easy for you to position
the hole puncher correctly when you
file away the received fax messages.
To switch this feature on, see the User
Parameters. (see P.58 “User Parame-
ters”(Switch 02 Bit 1)).
Note
❒ The center mark is not printed
when you use the machine for
making copies.
Page Length Reduction
If the machine receives a page that is
longer than the paper in the cassette,
the machine reduces the length of the
received image so that it will fit on
one page.
The image length is within the follow-
ing limits.
Paper size in the cas-
sette Maximum reducible
length
Letter 14.4''
Legal 18.3''
A4 15.3''
F4 17.0''