Ricoh FAX2050L - Manual (Page 30)

Setup
20
3
A
Press
{Function} {6} and enter the
access code
{2} {2} {2} {2}, and
then press
{6} {1} and the {Yes}
key.
Y/NEXTi
SET OWN NUMBER
B
Press the
{Yes} key.
OWN NO. KPAD
kkkkkkkkkkkkkkkkkkkk
C
Enter your phone number.
OWN NO. KPAD/Y/N
0111212-5551234kkkkk
Note
❒ The format of the number is
normally as follows: Interna-
tional Dial Prefix, Your Country
Code, Your Area Code, then
you must add a Pause, followed
by your telephone number.
Check the International Dialing
Prefix and the Country Code
with your local telecommunica-
tions operator. The example
shown is for the United States;
the codes to add are 011 and 1.
D
Press the
{Yes} key.
PROGRAMMED will flash on the dis-
play. The following display ap-
pears.
Y/NEXTi
SET POLLING ID
E
Press
V until the following dis-
play is shown.
Y/NEXTi
SET OWN NAME
F
Press the
{Yes} key.
OWN NAME ABC
kkkkkkkkkkkkkkkkkkkk
G
Enter your office, company, or
personal name, or any other ap-
propriate identification. (Using
the Quick Dial keys.)
OWN NAME ABC Y/N
XYZ COMPANY
Reference
See P.29 “Entering Characters” .
H
Press the
{Yes} key.
PROGRAMMED will flash on the dis-
play. The following display ap-
pears.
Y/NEXTi
SET FAX HEADER
I
Press the
{Yes} key.
The OWN NAME programmed in
step
H appears. You should keep it.
HEADER CHANGE? Y/N
XYZ COMPANY
Note
❒ If you wish to change it, press
the
{Yes} key and edit the FAX
HEADER.