Ricoh FAX2050L - Manual (Page 193)

Connecting the Power and Switching On
113
10
Connecting the Power and Switching On
Do not switch on until everything is connected properly.
A
Insert the power cable into the socket located at the rear of the machine.
B
Plug in the cable to the mains.
C
Turn the power switch on.
Important
❒ The supply from the wall outlet must not fluctuate more than 20V either
side of 115 Vac.
❒ The power cord should not be laid in a place where it might trip somebody.
❒ Do not lay anything on the power cord.
❒ If you have to use an extension cord, make sure that it is capable of carry-
ing 125V/15A, and that your facsimile terminal is the only piece of equip-
ment connected to that cord.
TSTP090N
TSTP090N.eps