Ricoh FAX2050L - Manual (Page 153)

Using Key Operator Settings
73
7
Setting the Auto Ring Time
(Function 61)
In Auto mode, the machine rings a
number of times to give you the
chance to pick up the handset before
taking the call automatically. You can
alter the number of rings by changing
the Auto Ring Time.
A
Press
{Function} {6} and enter the
access code
{2} {2} {2} {2}. Press
{6} {1}, and then the {Yes} key.
Y/NEXTi
SET OWN NUMBER
B
Press
i until the following dis-
play appears.
Y/NEXTi
SET NO. OF RINGS
C
Press the
{Yes} key.
The factory setting will be dis-
played.
NO. OF RINGS Y/N
08 RINGS
Note
❒ If you wish to keep these set-
tings, go to step
E.
D
Press the
{No} key, then enter the
new number using the ten key
pad.
E
Press the
{Yes} key, and then the
{Function} key.
Setting the Phone Line Type
(Function 62)
❖ Line:
You must match the fax machine to
the type of line you use: a tone line
or a pulse line. Then, you should
connect the line to the machine.
Note
❒ This function is not available in
some areas.
A
Press
{Function} {6} and enter the
access code
{2} {2} {2} {2}. Press
{6} {2}, and then the {Yes} key.
Y/NEXTi
SELECT LINE
B
Press the
{Yes} key.
SELECT LINE Y/hi
iTT PD
Note
❒ TT = Touch Tone
❒ PD = Pulse Dial
C
Press
W and V to set your machine
for a tone dial line (
TT
) or a pulse
dial line (
PD
).
SELECT LINE Y/hi
TT iPD
D
Press the
{Yes} key.
PROGRAMMED will flash on the dis-
play.
E
Press the
{Function} key.
READY 100% 10:00AM
SET DOC. OR DIAL NO.