Ricoh FAX2050L - Manual (Page 141)

Using Key Operator Settings
61
7
08 3, 2: Authorized Reception
(Can also use function 62)
AUTHORIZED RECEPTION
Bit
3, 2
X 0: Off*
0, 1: Receive messages only
from senders whose OWN
NAME/FAX NUMBERs are
programmed.
1, 1: Receive messages only
from senders whose OWN
NAME/FAX NUMBERs are
not programmed.
5, 4: Cassette Select
(Optional Second Paper Cassette Required)
CASSETTE SELECT
Bit
5, 4:
X, 0: Off
0, 1: Print Special Terminal's
messages using the main cas-
sette, but do not print any oth-
er with this cassette.*
1, 1: Do not print Special Ter-
minal's messages using the
main cassette
7, 6 : Forwarding
FORWARDING
Bit
7, 6:
X, 0: Off*
0, 1: Forward messages only
from senders whose OWN
NAME/FAX NUMBERs are
programmed.
1, 1: Forward messages only
from senders whose OWN
NAME/FAX NUMBERs are
not programmed.
09 1, 0: Memory Lock
MEMORY LOCK
Bit
1, 0:
X, 0: Off*
0, 1: Messages from senders
whose OWN NAME/FAX
NUMBERs are programmed,
are not printed unless you en-
ter the Memory Lock ID.
1, 1: Messages from senders
whose OWN NAME/FAX
NUMBERs are not pro-
grammed, are not printed un-
less you enter the Memory
Lock ID.
SW Bit & Definition Settings