Ricoh FAX2050L - Manual (Page 44)

Troubleshooting
34
4
Adjusting the Volume and Sounds the
Machine Makes (Function 92)
You can change the beeper (monitor) volume of the desired feature.
A
Press
{Function} {6} and enter the access number {2} {2} {2} {2}. Then
press
{9} {2}.
ADJUSTMENT Y/NEXTi
92 ADJUST VOLUME
B
Press the
{Yes} key.
C
Adjust the transmission monitor volume with the
W and V keys, and then
press the
{Yes} key when finished.
TRANS MONITOR Y/hi
MIN iii MAX
D
Adjust the reception monitor volume with the
W and V keys, and then press
the
{Yes} key when finished.
RECV MONITOR Y/hi
MIN iii MAX
E
Adjust the on hook monitor volume with
W and V keys and press the {Yes}
key when finished.
ONHOOK MONITOR Y/hi
MIN iii MAX
TRANS MONITOR The sound of signal transmissions.
RECV MONITOR The sound of signal receptions.
ONHOOK MONITOR The sound of signal on hook dialing.
DIAL MONITOR The sound when a number is dialed.
BUZZER The sound (does not buzz) of signal something going
amiss.
KEY The sound when a key is pressed.