Ricoh FAX2050L - Manual (Page 200)

Appendix
120
11
Exiting Energy Saving mode
Your machine exits Energy Saving mode when a fax is received.
To exit Energy Saving mode manually:
• In Energy Saving Standby mode, press the Energy Saver key.
• In Fax Standby mode, press any key.
• Set a document.
• Pick up the optional handset or the external telephone handset.
Selecting the Energy Saving Mode Type
To select the Energy Saving mode type, adjust the bit switch below with the User
Parameters. (See P.58 “User Parameters”.)
❖ Switch 05 Bit 6
• Energy Saving Standby: To let the heating roller cool to room temperature,
set bit 6 to 0.
• Fax Standby: To let the heating roller cool halfway set bit 6 to 1.
Note
❒ When the machine is shipped, Energy Saving Standby is turned on by default.
Reception in Energy Saving Mode
Once in Energy Saving mode, you can still receive messages. When a message is
received, the machine prints it and returns to Energy Saving mode.
Note
❒ If messages are already stored in memory, the machine cannot enter Energy
Saving mode.
❒ If the machine is in Power Saver mode, the message will be printed out after
the machine exits.