Ricoh FAX2050L - Manual (Page 22)

Faxing
12
2
C
Insert the document face down
into the feeder until the machine
beeps. Then adjust the guides to
match the width of the document.
Note
❒ You can dial before you set the
document. Place the document
after you dial the number and
go to step
G.
❒ Please set your document
straight in the feeder. If you set
more than 15 sheets, make sure
the ends of your document are
not skewed.
D
The display will look like this:
TRANSMIT OPTIONi
DIAL FAX NUMBER
E
If the Memory indicator is not lit,
press the
{Memory} key.
F
Dial the number in one of the fol-
lowing ways.
TRANSMIT Y/START
5551234kkkkkkkkkkkkk
*1 In this example Group Dial is pro-
grammed in Quick Dial 08.
*2 In this example Quick Dial key 30
is programmed as the Group key,
and Group dial number 1 is pro-
grammed.
Note
❒ If you install the handset or an
external telephone, you can
send the message manually.
Pick up the handset and dial.
❒ If you want to erase a digit of
the phone number, press the
{Clear} key. If you want to erase
the entire number, press the
{No} key.
❒ The maximum destinations you
can dial using the ten key pad is
68. However, this limitation is
also subject to memory capaci-
ty.
TSTH110N
TSTH110N.eps
Tsms040e.eps
Ten Key Pad Quick Dial
Speed Dial Group
Example:
Method *1 Quick
Dial key 08.
Method *2 Quick
Dial key 30 and 1
on the ten key pad.
1 2 3
4 5 6
7 9
*
GFDIAL0N
07 06
GFDIAL1N
Speed Dial
1 0
Example: Speed Dial 10
GFDIAL2N