Ricoh FAX2050L - Manual (Page 21)

Memory Transmission and Immediate Transmission
11
2
Memory Transmission and Immediate
Transmission
There are two ways to send a fax mes-
sage.
• Memory Transmission
• Immediate Transmission
Memory Transmission
A Memory Transmission is conve-
nient because:
• Fax messages can be scanned
much more quickly (you can take
your document away from the fax
machine without waiting too
long).
• While your fax message is being
sent, another user can operate the
machine (people will not have to
wait by the fax machine too long).
• You can send the same message to
more than one place with the same
operation.
• There are two kinds of Memory
Transmission: Parallel and Nor-
mal. Parallel Memory Transmis-
sion is the default.
Note
❒ If your document gets stuck while
it is being processed, press the
{Stop} key, and turn to P.38 “Clear-
ing a Document Jam” for instruc-
tions on how to safely remove the
original.
A
Make sure that the machine is in
standby mode for faxing.
The display should look like this:
READY 100% 10:00AM
SET DOC. OR DIAL NO.
Note
❒ If the display is blank, press the
Energy Saver key to exit Energy
Saving mode.
B
Fan your document stack (at most
30 pages: 20 lb) to make sure all
pages are loose, then square it.
Note
❒ All pages in your document
must be one-sided and be of the
same size.
TSTS010N.eps