Ricoh FAX2050L - Manual (Page 160)

Troubleshooting
80
8
Reading Reports
You can have reports printed from
your machine automatically, or print
them out yourself.
Error Report (Turned On/Off
by a Service Representative)
This report is printed after each un-
successful communication. The com-
munication failure report is printed
after a job has been completed. And at
the end, it prints a communication
failure or transmission result report.
Check it, and retransmit any pages
that were not sent. If a particular
problem continues or gets worse,
keep the error reports for the service
representative.
Power Failure Report
This report is printed if the machine's
power was off long enough to erase
files from the memory. The report
gives details of the files that were lost.
With this information, you may store
messages for transmission again, and
contact the senders of any received
messages that were lost.
Note
❒ Phone numbers stored in Quick/
Speed/Groups are not lost.