Ricoh FAX2050L - Manual (Page 133)

Using Key Operator Settings
53
7
To add OWN NAMEs/FAX
NUMBERs to this number
A Enter an OWN NAME/FAX
NUMBER and press the
{Yes}
key, and then go to step
F.
NAME/NO. ABC Y/N
XYZ COMPANY
E
Press the
{Yes} key to edit or de-
lete the OWN NAME/FAX NUM-
BER.
If you edit the OWN NAME/FAX
NUMBER
A Edit the OWN NAME/FAX
NUMBER.
NAME/NO. Y/N
STORE AS WILD CARD?
B Press the {Yes} key and go to
step
F.
If you delete the OWN NAME/
FAX NUMBER
A Press the {No} key.
Important
❒ If you delete all the OWN
NAMEs and FAX NUMBERs
for a forwarding station, you
must also delete the forward-
ing station (see step
B). If you
do not do this, all incoming
messages will be forwarded
to that station.
B Press the {Yes} key and go
back to step
D.
F
Press the
{Yes} key to store it as a
wild card.
FORWARD Y/N
SET NAME/NO.?
Otherwise
A Press the {No} key.
G
Press the
{Function} key to finish.
Edit or enter another OWN
NAME/FAX NUMBER for this
forwarding station:
A Press the {Yes} key and go to
step
D.
To work on another forwarding
station:
A Press the {No} key and go to
step
B.
Important
❒ If you switch the forwarding
on and program no OWN
NAME/FAX NUMBER, all
incoming messages are for-
warded.
Selecting Which Messages to Forward
To choose which messages are for-
warded, adjust bit 7 of switch 08 with
the User Parameters. Two settings are
available.
• Forward all incoming messages
from specified senders (bit 7=0).
• Forward all incoming messages
except those from specified send-
ers (bit 7=1).
(See P.58 “User Parameters” ).