Roland AT90S - Manual (Page 107)

105
Chapter 4 Using the Performance Functions
Using the Foot Switches
On either side of the expression pedal are two Foot Switches. Different
functions are assigned to each of these two foot switches.
fig.04-07
With the factory settings, the following functions are assigned to the left and
right Foot Switches.
1.
Press the right Foot Switch toward the right.
If Rotary is turned on, the Rotary effect will switch between “Fast” and
“Slow” each time you press the Foot Switch.
2.
Press the left Foot Switch toward the left.
While you are pressing the Foot Switch, the pitch will be temporarily
lowered. When you release the Foot Switch, the pitch will return to normal.
Right Foot Switch Switch the Rotary effect between Fast/Slow.
Left Foot Switch
Glide (an effect by which the pitch is lowered by a semi-
tone while the foot switch is pressed, and is returned to
what is originally was when you release your foot).
You can also change the
functions assigned to the
left and right Foot
Switches. Please refer to
“Changing the Function
of the Foot Switch” (p.
160).
The Glide effect will only
be applied to the keyboard
section that has been
specified as being the
destination for the Pitch
bend/Vibrato lever. Please
refer to
“Selecting the
Range of Keys to Which
the Pitch Bend/Vibrato
Lever will Apply” (p. 163).
NOTE
If “Regist Shift” is turned
“RIGHT” or “LEFT,” the
foot switch will function
only to switch registrations
(p. 161).