Roland AT90S - Manual (Page 147)

145
Chapter 7 Recording/Playing Back What You Play
Count-In Recording
This setting (ON/OFF) determines whether or not a
metronome count-in (2 measures) will be heard after
pressing the [Play/Stop] button on recording.
1. Touch <Rec/Play> on the Main screen.
The Rec/Play screen appears.
fig.07-04_50
2. Touch <Utility>.
The Utility screen appears.
3. Touch <Options>.
fig.03-37_50
4. Touch the Count-In Rec setting (ON/OFF) to
switch it between “ON/OFF.”
Each time you touch the Count-In Rec setting, it will
alternate between ON/OFF.
5. Touch <Exit>.
Viewing a Musical Score
1. Touch <Rec/Play> on the Main Screen
The Rec/Play screen appears.
fig.07-04_50
2. Touch <Utility>.
The Utility screen appears.
fig.07-
3. Touch <Song Select>.
The Song Select screen appears.
fig.07-31_50
4. Touch < >< > to select the song that you
want to play back.
5. Touch <Load>.
6. Touch <Exit>.
7. Touch <Utility> in the Rec/Play screen.
Setting Description
ON
A two-measure count will sound before
recording
OFF No count will sound before recording
Min
Max
Min
Max
Min
Max
Min
Max
Harmony Intelligence