Chapter 10 connecting with external device – Roland AT90S User Manual
Page 180
178
Chapter 10 Connecting with External Device
Name and Functions of Jack and Connectors (AT-90S/80S)
The functions of the jacks on the bottom of the keyboard are described below.
1.
Illumination Switch → p. 21
2.
Phones Jack → p. 20
3.
Mic Volume Knob → p. 20
4.
Mic In Jack → p. 20
5.
LCD Contrast Knob
Adjust the brightness of the touch panel.
6.
Computer Connector
You can connect a computer to the AT-90S/80S and
exchange performance data between the two.
7.
Computer Switch
Set this switch to Mac, PC-1, or PC-2 according to the
type computer that’s connected. Additionally, this
switches between MIDI In connector and the Computer
connector.
8.
MIDI In/Out Connectors
You can connect external MIDI devices to the AT-90S/
80S and exchange performance data between them.
9.
Video Out Jack
You can connect a TV to display lyrics.
10.
Input switch → (p. 180)
11.
Input L(mono)/R Jacks
Using this jack, you can connect other sound generating
devices or audio equipment and play sounds from other
devices through the AT-90S/80S’s speaker.
12.
Output L(mono)/R Jacks
You can some sounds if you connect speakers or other
audio equipment to these jacks. You can also hook up a
cassette recorder to record your performances.
13.
Aux Out L(mono)/R
You can connect an external speaker or a reverb unit to
obtain a more spacious reverb.
Computer
PC-1
Mac
PC-2
MIDI
Out
In
MIDI
Video
Out
L (mono)
R
Input
Normal
RSS
L (mono)
R
Aux
L (mono)
R
Main
Output
Illumination
Contrast
LCD
Phones
Max
Min
Mic
Volume
In
On
1
6
9
10
8
7
2
4
3
5
13
11
12