Roland AT90S - Manual (Page 143)

141
Chapter 7 Recording/Playing Back What You Play
If the following screen appears
The message below is shown when the performance song in
the unit has not been saved to disk.
fig.E-62
If you wish to erase the performance song
1. Touch the <OK> button.
If you wish to save the performance song on a
floppy disk
1. Touch the <Cancel> button.
Save the song on a floppy disk (p. 139).
If you load a song other than Atelier performance songs
(SMF music files, etc.), the Rhythm (drum) Part will
automatically be loaded into the Rhythm track, and the other
Parts loaded into the Accomp and Bass tracks (p. 134).
If loading is canceled because the memory limit has been
reached, the following message will be displayed:
fig.E-30
Layering a New Recording
onto SMF Music Files
You can load commercially available SMF music files into the
AT-90S/80S/60S, and record your own performance on top
of it. During recording, the data you’ve loaded will be played
back, while you record your performance.
1. Insert a floppy disk containing commercially
available SMF music files into the floppy disk
drive.
2. Touch <Rec/Play> on the Main screen.
The Rec/Play screen appears.
3. Touch <Utility>.
The Utility screen appears.
4. Touch <Song Select>.
The Song Select screen appears.
fig.07-31_50
5. Touch < >< > to select the performance data
that you wish to load into internal memory.
6. Touch <Load> (load performance data).
fig.07-32_50
The selected performance data will be loaded into
internal memory.
Min
Max
Min
Max
Min
Max
Min
Max
Harmony Intelligence