Roland AT90S - Manual (Page 86)

84
Chapter 3 Using the Registration Buttons
Saving Registration Sets to a Floppy
Disk
With the settings of Registration buttons [1]–[12] (on the AT-60S,
Registration buttons [1]-[8]) considered as one set, a single floppy disk can
store up to 99 sets of data. We recommend that complex panel settings or
Registrations you wish to keep be saved on disk. If AT-90S/80S/60S
Registrations that you create are saved on a floppy disk, they can then be
recalled later or recalled for use on another AT-90S/80S/60S.
1.
Make sure that the disk drive contains a disk that was
formatted (p. 82) by the AT-90S/80S/60S.
2.
Touch <Registration> on the Main screen.
The sub-window appears.
fig.03-04_55
3.
Touch <Save>.
The Registration Save screen appears.
fig.03-09_55
4.
Touch < >< > in the screen to select the save-
destination number.
If you wish to assign a
name before you save, refer
to
“Assigning a Name to a
Registration Set” (p. 80)
Min
Max
Min
Max
Min
Max
Min
Max
Harmony Intelligence