Roland AT90S - Manual (Page 24)

22
Before You Start Playing
About the Bench
The bench seat can be opened, and sheet music and other
items can be stored inside.
Caution When Using the Bench
fig.00-31
When opening/closing the seat, be careful not to pinch your
fingers.
fig.00-36
Restoring All the Factory
Default Settings
The settings stored in the AT-90S/80S/60S can be returned to
their factory settings. This function is called “Factory Reset.”
1. Make sure there is no floppy disk in the disk
drive before carrying out the procedure.
2. Touch <System> on the Main screen.
The System screen appears.
fig.00-37.eps
3. In the System screen, touch <Utility> to open the
Utility screen.
fig.00-38.eps
4. In the Utility screen, touch <Factory Reset>.
fig.00-39.eps
To restore all of the factory settings other than those for the
Rhythm [Disk] button and [World] button settings, touch
<Panel Reset>.
Min
Max
Min
Max
Min
Max
Min
Max
Harmony Intelligence