Roland AT90S - Manual (Page 49)

47
Chapter 1 Selecting and Playing Sounds
If you press the Footage Type button, Lower Footage button, or Upper
Footage button to turn it on (button’s indicator lit), a footage screen like the
following appears.
Footage Screen
When the Footage Type is “Flute”
The sliders displayed in the screen are called “harmonic bars.”
By touching the harmonic bars and sliding them, you can adjust the volume
of each footage.
The volume can be adjusted over nine steps (0–8).
When a harmonic bar is pulled out all the way (8), the volume is loudest.
When it is pushed in all the way (0), there will be no sound.
When the Footage Type is “Pipe” or “Theater”
The buttons displayed in the screen are called “tablets.”
You can press each tablet to turn it on/off.
The Footage screen will be
displayed for several
seconds, then it will close
automatically.
When you touch the
Footage screen and then
change the settings, the
screen is held in that
condition.
You can touch
< > to switch
between the Upper Footage
screen and Lower Footage
screen.
On Off
Min
Max
Min
Max
Min
Max
Min
Max
Harmony Intelligence