Texas Instruments TMS320C6454 - Manual (Page 200)

www.ti.com
PRODUCT PREVIEW
RGREFCLK
(Output)
2
3
4
4
1
TMS320C6454
Fixed-Point Digital Signal Processor
SPRS311A – APRIL 2006 – REVISED DECEMBER 2006
7.14.3.3 EMAC RGMII Electrical Data/Timing
An extra clock signal, RGREFCLK, running at 125 MHz is included as a convenience to the user. Note
that this reference clock is not a free-running clock. This should only be used by an external device if it
does not expect a valid clock during device reset.
Table 7-84. Switching Characteristics Over Recommended Operating Conditions for EMAC RGREFCLK -
RGMII Operation (see Figure 7-68 )
-720
-850
NO. PARAMETER UNIT
-1000
MIN MAX
1 t
c(RGFCLK)
Cycle time, RGREFCLK 8 - 0.8 8 + 0.8 ns
2 t
w(RGFCLKH)
Pulse duration, RGREFCLK high 3.2 4.8 ns
3 t
w(RGFCLKL)
Pulse duration, RGREFCLK low 3.2 4.8 ns
4 t
t(RGFCLK)
Transition time, RGREFCLK 0.75 ns
Figure 7-68. RGREFCLK Timing
Table 7-85. Timing Requirements for RXC - RGMII Operation (see Figure 7-69 )
-720
-850
NO. UNIT
-1000
MIN MAX
10 Mbps 360 440
1 t
c(RXC)
Cycle time, RXC 100 Mbps 36 44 ns
1000 Mbps 7.2 8.8
10 Mbps 0.40*t
c(RXC)
0.60*t
c(RXC)
2 t
w(RXCH)
Pulse duration, RXC high 100 Mbps 0.40*t
c(RXC)
0.60*t
c(RXC)
ns
1000 Mbps 0.45*t
c(RXC)
0.55*t
c(RXC)
10 Mbps 0.40*t
c(RXC)
0.60*t
c(RXC)
3 t
w(RXCL)
Pulse duration, RXC low 100 Mbps 0.40*t
c(RXC)
0.60*t
c(RXC)
ns
1000 Mbps 0.45*t
c(RXC)
0.55*t
c(RXC)
10 Mbps 0.75
4 t
t(RXC)
Transition time, RXC 100 Mbps 0.75 ns
1000 Mbps 0.75
200 C64x+ Peripheral Information and Electrical Specifications Submit Documentation Feedback