6 megamodule revision, Section 5.6, Product preview – Texas Instruments TMS320C6454 User Manual

Page 82

Advertising
background image

www.ti.com

PRODUCT PREVIEW

5.6 Megamodule Revision

TMS320C6454
Fixed-Point Digital Signal Processor

SPRS311A – APRIL 2006 – REVISED DECEMBER 2006

The version and revision of the C64x+ Megamodule can be read from the Megamodule Revision ID
Register (MM_REVID) located at address 0181 2000h. The MM_REVID register is shown in

Figure 5-5

and described in

Table 5-3

. The C64x+ Megamodule revision is dependant on the silicon revision being

used. For more information, see the TMS320C6455/54 Digital Signal Processor Silicon Errata (literature
number

SPRZ234

).

31

16 15

0

VERSION

REVISION

(A)

R-1h

R-n

LEGEND: R = Read only; -n = value after reset

A.

The C64x+ Megamodule revision is dependant on the silicon revision being used. For more information, see
the TMS320C6455/54 Digital Signal Processor Silicon Errata (literature number

SPRZ234

).

Figure 5-5. Megamodule Revision ID Register (MM_REVID) [Hex Address: 0181 2000h]

Table 5-3. Megamodule Revision ID Register (MM_REVID) Field Descriptions

Bit

Field

Value

Description

31:16

VERSION

1h

Version of the C64x+ Megamodule implemented on the device. This field is always read as 1h.

15:0

REVISION

Revision of the C64x+ Megamodule version implemented on the device. The C64x+ Megamodule
revision is dependant on the silicon revision being used. For more information, see the
TMS320C6455/54 Digital Signal Processor Silicon Errata (literature number

SPRZ234

).

C64x+ Megamodule

82

Submit Documentation Feedback

Advertising