Toshiba FS-2600-1 - Manual (Page 106)

5. PROGRAMMING OPERATIONS EO1-11138
5-7
5.4 How to Access a Program Item
2. When you obtain an open-price PLU in the PLU Table Setting (Submode 4), depress the [OPEN]
key before the [Enter] key depression in a step to input a PLU price.
3. If a journal printer is connected to the register, data you have just programmed will be printed on
it. No print occurs on a receipt printer, however its data will be stored in the electronic journal
buffer memory.
5.4.2 How to Access a Program Item through the Keyboard
You can directly access a program item you want to perform through a key operation on the keyboard.
■ Store Name/Message, Commercial Message, Footer Logo Message Programming (Submode 1)
CONDITION Any time outside a sale When you enter 1 and depress the [X] key,
the screen shown below will appear.
OPERATION Mode Lock: SET
. . .
Repeat for another line.
1 to 4: Store Name/Message
(for Receipt/Receipt Guest Check)
5 to 7: Commercial Message (for Receipt)
8 to 9: Footer Logo Message (for Receipt)
(For sequentially programming
lines, the line number
specification can be skipped.)
max. 40 characters/line
(See 5.2 Character
Entries.)
. . .
To complete
this line To complete the
programming and
return to the program
menu screen.
. . .
1 [X] |Line No.| [ST]
Character Entries [ST] [AT/TL]
NOTES: 1. For each line, a maximum of 40 regular-sized characters or 20 double-sized characters may be
entered. A combination of both types is also available.
2. When you fill one print line with all blanks, the line will be one line space.
3. If no commercial message is required on a receipt, fill the three print lines assigned to the
commercial message with all blanks. As a result, no extra lines will be fed.
4. As for the four print lines assigned to the store name/message, if you fill the area with all blanks,
it will be four lines space.
5. If your printer is the BRST-10 or the TM-T88, you can make and print your own logo on the store
name/message area.
6. When the program option “Footer Logo Message Print” is selected, a maximum of a 2-line footer
logo message can be programmed and it will be additionally printed on a receipt issued for a
sales transaction without an order table No. entry.
* SET * 02-06-1999 12:34
PROGRAMMING STORE NAME
1 STORE
↓
2 STORE
3 STORE
4 STORE
Please input item No.
0.00
Pg up Pg dw Enter ↑ ↓