Toshiba FS-2600-1 - Manual (Page 133)

5. PROGRAMMING OPERATIONS EO1-11138
5-34
5.4 How to Access a Program Item
* SET * 02-06-1999 12:34
PROGRAMMING STOCK
000001 PLU000001 580
Please input PLU code.
0.00
Pg up Pg dw Enter ↑ ↓
■ PLU Stock Loading or Changing (Submode 24)
This submode loads or changes the stock quantities of PLUs with the Stock-process status, as part of stock
controls. The stock of a PLU may be entered initially in the PLU TABLE PROGRAMMING operation
(Submode 4), and may be adjusted in this operation, from day to day, as the stock increases due to delivery
from wholesalers, etc. or as the stock decreases due to damages or losses.
CONDITION Any time outside a sale When you enter 24 and depress the [X] key,
the screen shown below will appear.
OPERATION Mode Lock: SET
24 [X] |PLU Code| [PLU] |Adding Quantity| [STOCK] [AT/TL]
[VOID] Subtracting|
Quantity |
0 to 9999.99
*
* (Repeatable for
the PLU of the
next sequential
code)
Repeat for other PLUs for stock change.
0 to 9999.99
ex.) To subtract 150 from 580 of a current stock quantity of a PLU 1.
Mode Lock: SET
Enter 24, depress [X].
1 [PLU] [VOID] 150 [STOCK] [AT/TL]
Journal Print
P24 STOCK
000001 PLU000001
-150
430
0038 14:07TM
NOTES: 1. When you enter 24 and depress the [X] key, a current stock quantity of each PLU will be
displayed.
2. The total stock quantity of a PLU after the addition or subtraction must not exceed the value
range from 0 through 9999.99. Otherwise, the Adding or Subtracting Quantity entry will result in
an error. Use the [ . ] key if decimal portion is contained.
3. The PLU Code here must exist in the PLU Table file and the PLU must be set with Stock-process
status.