Toshiba FS-2600-1 - Manual (Page 74)

2. MANAGER’S OWN OPERATIONS IN “MGR” MODE EO1-11138
2-3
*REG * 02-06-1999 03:04 1 1CLKendi
P1S1
MENU3
0.00
TOTAL 0.00
DISP1 DISP2 DISP3 DISP4 DISP5
NOTE: A program option allows you to perform this
operation in the REG mode.
1 to 4
2.5 RKP Table Change
This operation changes an RKP (remote kitchen printer) on which the data is outputted.
CONDITION Any time outside a sale
OPERATION Mode Lock: MGR
■ RKP Designation
|RKP No.|
[RKP]
RKP of which No. is entered will be designated as the destination of the data output.
Example) If you operate 123 then [RKP], the RKPs of Nos. 1 to 3 will be designated.
If you operate 0 then [RKP], no RKPs will be designated.
* REG * 02-06-1999 03:04 1 1CLKendi
P1S1
RKP1 ON
RKP2 OFF
RKP3 OFF
RKP4 OFF
RKP
0.01
TOTAL 0.00
DISP1 DISP2 DISP3 DISP4 DISP5
■ RKP Connection Table Change
[RKP] ........................ Each time you depress the [RKP] key, the RKP connection table is changed from 1 to
2, and vice versa.
* REG * 02-06-1999 03:04 1 1CLKendi
P1S1
1
R 1 1 ON
RKP1 1 2 ON
RKP2 0 OFF
RKP3 0 OFF
RKP4 0 OFF
J 0 OFF
RKP
0.00
TOTAL 0.00
DISP1 DISP2 DISP3 DISP4 DISP5
Terminal
ID No. Port
No.
2.5 RKP Table Change
RKP Connection
Table No. (1 or 2)