Toshiba FS-2600-1 - Manual (Page 158)

5. PROGRAMMING OPERATIONS EO1-11138
5-59
ex.) To set 10% on [%+] Key:
Mode Lock: SET
Enter 10, depress [%+].
To reset the rate once set:
Enter 0, depress the required % key.
(Then the % key will always require a manual rate entry in sale entries.)
Journal Print
5.4 How to Access a Program Item
P00 %1RATE
%+ 10%
0139 10:49TM
* SET * 02-06-1999 12:34
PROGRAMMING MISC
↑↓
09 SI1%RATE 0%
10 SI2%RATE 0%
11 CUR RATE1 0*
12 CUR RATE2 0*
13 CUR RATE3 0*
14 CUR RATE4 0*
15 CUR RATE5 0*
16 REG NO. #0
Please input data.
0.00
Pg up Pg dw Enter ↑ ↓
■ Preset Rate Setting for Selective Itemizers (SI1 and SI2)
If any of [ST1/TL] (or [SI/TL]) and [SI2/TL] keys are installed on the keyboard, a preset rate may be
programmed on each key.
As for the functions and applications of the Selective Itemizers, refer to the description on the next page.
CONDITION Any time outside a sale When you complete the following
programming, the screen shown below will
OPERATION Mode Lock: SET appear. Depress the [ESC] key to go
back to the program menu screen.
|Preset Rate of SI 1| [SI1/TL] (or [SI/TL])
(0.001 to 99.999 (%);
use the [ . ] key if a decimal portion is contained.)
|Preset Rate of SI 2| [SI2/TL]
ex.) To set 7% as SI 1 preset % rate:
Mode Lock: SET
7 [ST1/TL]
......
......