Tax exemption -23, Listing capacity open -23, Selective itemizer (si) status modification -23 – Toshiba FS-2600-1 User Manual
Page 49: Selective itemizer (si) total read -23, 37 tax exemption, 38 listing capacity open, 39 selective itemizer (si) status modification, 40 selective itemizer (si) total read
9. TRANSACTION ENTRIES
EO1-11138
9-23
9.37 Tax Exemption
*REG * 02-06-1999 03:04 1 1CLKendi
P1S1
1 PLU000010 10.00T
TAX2EX 10.00
TOTAL
10.00
1 TOTAL 10.00
DISP1 DISP2 DISP3 DISP4 DISP5
OPERATION
■
Selective Tax Exemption
Examples)
[TX1/M] [EX]
Sale Finalization ........ to exempt Tax 1 from the sale
[TX1/M] [TX2/M] [EX]
Sale Finalization ........ to exempt Tax 1 & Tax 2 from
the sale
[TX1/M] [TX2/M] [TX3/M] [EX]
Sale Finalization ........ to exempt Tax 1, Tax 2 and Tax
3 from the sale
■
All Tax Exemption
[EX]
Sale Finalization
to exempt all the
[TX1/M] [TX2/M] [TX3/M] [TX4/M] [EX]
Sale Finalization
taxes from the sale
NOTE:
If the inclusive-tax feature is selected to the
[TX3/M] and [TX4/M] keys, the tax exemption
of Tax 3 and Tax 4 is not allowed.
■
For Departments and PLUs
Depress the [LC OPEN] (or [OPEN]) key prior to or any time during the PLU entry (including REPEAT and
QUANTITY EXTENSION entries). Please note that the [LC OPEN] or [OPEN] key must be pressed, at the latest,
before the final key of the entry sequence. The High Amount Limit for the PLU will be extended with two higher
digits, and the Low Amount Limit will be extended with one lower digit. For entering an amount still exceeding
these limits, you must call for Manager Intervention.
■
For Media Tender Amounts
Depress the [LC OPEN] (or [OPEN]) key before or after the tender amount entry. The High Amount Limit for the
media tendering will be extended with one higher digit. For entering an amount still exceeding this limit, you must
call for Manager Intervention.
Selective Itemizer (SI) Status Modification
Depress the [SI/M] ([SI1/M], [SI2/M]) key for entering the required PLU item, the same way as [LC OPEN] is
operated. The SI-net status is reversed to non-net status, and vice versa.
Selective Itemizer (SI) Total Read
Depressing the [SI/TL] key during the sales transaction displays the selective itemizer total calculated.
OPERATION
PLU (menu item) Entry
[SI/TL]
([SI1/TL], [SI/2/TL])