Toshiba FS-2600-1 - Manual (Page 198)

5. PLU MAINTENANCE EO1-11138
5-3
Repeatable for other PLUs
Max. 6 digits
1 to 5 Max. 6 digits
Repeatable for a price change of another price level. When you
change the price of each price level in numerical order, the price level
designation can be skipped.
5.2 PLU Price Change with DLL (Submode 73)
Repeatable for other PLUs to be deleted.
■ Deletion
CONDITION The sales data of the required PLUs are zero and all terminals are outside a sale,
programming, or report taking operations.
OPERATION Mode Lock: SET and RTR Declaration is ON
63 [X] [ITEM CORR] |PLU Code| [PLU] [AT/TL]
NOTES: 1. When the [AT/TL] key is depressed in the above operation, the master terminal sends each
satellite terminal (or the designated satellite terminals) the DLL start command to make it “HOLD”
condition. And then, the master terminal sends the DLL data to each terminal. After the DLL is
completed, the master terminal sends each terminal the DLL end command to release it from
“HOLD” condition. However, a program option allows you to perform a DLL operation even while
each terminal is not in idle status.
2. A maximum of 100 PLU tables can be added or changed in one DLL operation sequence.
5.2 PLU Price Change with DLL (Submode 73)
This DLL operation is used to change a PLU price on each price level, and send the data to each satellite terminals.
CONDITION Any time outside a sale for Master or Satellite
OPERATION Mode Lock: SET and RTR Declaration is ON
73 [X] |PLU Code| [PLU]
[PLU Preset-code Key]
[MENU 1 to 5]
|Price Level| [ST] |New Preset Price| [#] [AT/TL]
NOTES: 1. When the [AT/TL] key is depressed in the above operation, the master terminal sends each satellite terminal
(or the designated satellite terminals) the DLL start command to make it “HOLD” condition. And then, the master
terminal sends the DLL data to each terminal. After the DLL is completed, the master terminal sends each
terminal the DLL end command to release it from “HOLD” condition. However, a program option allows you
to perform a DLL operation even while each terminal is not in idle status.
2. A maximum of 100 PLU prices can be changed in one DLL operation sequence.
3. When zero is entered as the New Preset Price value, the PLU is set with a zero price. When the
New Preset Price entry is skipped and the [#] is simply depressed, it will be an open-price PLU.