Toshiba FS-2600-1 - Manual (Page 130)

5. PROGRAMMING OPERATIONS EO1-11138
5-31
5.4 How to Access a Program Item
* SET * 02-06-1999 12:34
PROGRAMMING CUSTOMER
Please input customer code.
0.00
Pg up Pg dw Enter ↑ ↓
■ Customer File Table Setting (Submode 15)
This programming is used to set a customer file table(customer code, customer name, limit amount and price
level), which is used for the charge posting transaction.
CONDITION Any time outside a sale When you enter 15 and depress the [X] key,
the screen shown below will appear.
OPERATION Mode Lock: SET
Address 1: Customer Name
1 [ST]
Submode No.
15 [X] |Customer File Code| [NS]
Max. 12 digits
Character Entries [ST]
Max. 16 characters
Address 2: Charge Posting Limit
Amount for each Customer
2 [ST]
|Charge Posting Limit Amount| [#]
Max. 8 digits
[AT/TL]
Address 3: Price Level for each
Customer
3 [ST]
|Price Level| [#]
1 to 5
Repeat for another Customer file.
Customer Card Reading through the MCR
ex.) To program the following to a customer file code 5.
Customer File Code 5: Address 1 (Customer Name): SHEARER
Address 2 (Limit Amount): $500.00
Address 3 (Price Level): 2
Mode Lock: SET
Enter 15, depress [X].
5 [NS] 1 [ST] SHEARER [ST] (2 [ST]) 50000 [#] (3 [ST]) 2 [#] [AT/TL]
Journal Print
P15 CUSTOMER
000000000005
#01 SHEARER
#02 500.00
#03 2
00006
0034 12:56TM
NOTES: 1. A maximum of 5000 customer file tables can be used.
2. When a charge posting limit amount is set for each customer in this programming, it prevails over
the common limit amount programmed in the Submode 8.