Thermador CES304FS - Manual (Page 17)

17
Pots to be used with the CookSmart  must have a surface that radiates heat
especially well to the sensor.
You can use enamelware pots. The base of the cookpot must be large enough to
completely cover the heating element.
Stainless steel and aluminum pots can also be used when fitted with the sensor
bands that are included with your unit. To use them, attach the sensor band to the
pot by means of the adhesive backing.
Make certain that the sensor band is always facing the sensor. If the band is not
facing the sensor, the controller will not work properly and foods can boil over.
You can also purchase the sensor band from your electrical appliance dealer:
SENSORSTRP
You can also purchase system pots that are suitable for use with CookSmart  from
your electrical appliance dealer:
SENSORPOTH
SENSORPOT6
SENSORPOT7
SENSORPOT9
CHEFSPAN13
The control system will not operate properly if unsuitable pots are used. Foods can
boil over or burn.
The point at which water begins to boil in your kitchen will depend on your elevation
above sea level. If your dish is boiling too fast or too slowly, you can adjust the
boiling point within the 195Ć215 ºF (90Ć100 ºC) temperature range:
Select ™ in the basic settings. Select the heating element. The basic setting is „.
Select the proper value for your elevation in the settings area.
Value at ™ Elevation in ft. Elevation in m
‚ 0Ć350 0Ć100
ƒ 350 Ć 650 100Ć200
„* 650Ć1300 200Ć400
1300Ć2000 400Ć600
† 2000Ć2600 600Ć800
‡ 2600Ć3300 800Ć1000
ˆ 3300Ć4000 1000Ć1200
‰ 4000Ć4600 1200Ć1400
Š Above 4600 Above 1400
* Basic setting
Suitable pots for
CookSmart 
Suitable pots
System pots
Note
Compensation for
elevation above sea level