Toro Sand Pro 5020 - Manual (Page 147)

Sand Pro 2020/3020/5020 Page 6 – 3 Wheels, Brakes,and Miscellaneous
Adjustments
Adjust Steering Chain
NOTE: Since the chain and sprocket are subjected to
sand thrown up by the front tire, inspect them frequently
for wear. If either the chain or sprocket is worn beyond
acceptable limits, replace both chain and sprocket.
NOTE: The steering chains on the SP 2020/3020 (Fig.
1) and SP 5020 (Fig. 2) are adjusted in the same man-
ner. Newer models of the SP 3020 have a chain guide
similar to the SP 5020.
1. Place front wheel in the straight ahead position.
2. Adjust locknuts until the chain is snug on both sides
of the sprocket.
3. Turn the steering wheel full left and full right to be
sure the chain does not bind or hang up in either direc-
tion. Readjust chain as required.
1. Lock nut 2. Chain
Figure 1
1
2
1. Lock nut
2. Chain
3. Chain guide
Figure 2
1
2
3
Whells, Brakes,
and Miscellaneous