TANDBERG Codec C90 D14128.02 - Manual (Page 103)

D14128.02—NOVEMBER 2008 103
Codec C90 System Integrator Guide
Contents Introduction Getting Started Interfaces About the API xConfiguration xCommand xStatus Cameras Appendices Contact us xStatus
xStatus SystemUnit State NumberOfInProgressCalls
Number of calls in progress.
Value space: 0..5
Default value: N/A
Example: *s SystemUnit State NumberOfInProgressCalls: 0
xStatus SystemUnit State Subsystem Application
State of system application.
Value space: Initialized, Initializing
Default value: N/AInitializing
Example: *s SystemUnit State Subsystem Application: Initialized
xStatus SystemUnit ContactInfo
To be described.
Value space: S: 0..100
Default value: N/A
Example: *s SystemUnit ContactInfo: “[email protected]”
xStatus Standby Active
States whether standby mode is active.
Value space: On, Off
Default value: Off
Example: *s Standby Active: On
xStatus Video Input Source [1..5] Resolution Height
Last detected resolution height for source.
Value space: 0..3000
Default value: 0
Example: *s Video Input Source 1 Resolution Height: 1080
xStatus Video Input Source [1..5] Resolution Width
Last detected resolution width for source.
Value space: 0..4000
Default value: 0
Example: *s Video Input Source 1 Resolution Width: 1920
xStatus Video Input Source [1..5] Resolution RefreshRate
Last detected resolution refresh rate for source.
Value space: 0..300
Default value: 0
Example: *s Video Input Source 1 Resolution RefreshRate: 50
xStatus Video Input HDMI [1..4] Connected
True if a connection on HDMI 1..4 is detected. Not all connections can be detected.
Value space: True/False
Default value: N/A
Example: *s Video Input HDMI 2 Connected: False
xStatus Video Input HDSDI [1..4] Connected
True if a connection on HD-SDI 1..4 is detected. Not all connections can be detected.
Value space: True/False
Default value: N/A
Example: *s Video Input HDSDI 3 Connected: False
The Standby status
The Video status