About xfeedback, Codec c90 system integrator guide – TANDBERG Codec C90 D14128.02 User Manual
Page 47
D14128.02—NOVEMBER 2008
47
Codec C90
System Integrator Guide
Contents
Introduction
Getting Started
Interfaces
About the API
xConfiguration
xCommand
xStatus
Cameras
Appendices
Contact us
About the API
xFeedback ?
Usage: xfeedback register <XPathExpression>
or:
xfeedback deregister <XPathExpression>
or:
xfeedback list
–
<examples:
“xfeedback register status/call“ – to monitor all changes
“xfeedback register status/call––“ – to monitor only call state changes
“xfeedback register configuration“ – to monitor all configuration changes
“xfeedback register event” - to monitor all events >
OK
About xFeedback
The xFeedback command is used to specify what parts of the
configuration and status hierarchies to monitor.
The xFeedback command will only be issued on the RS-232/Telnet/
SSH for which it is specified.
If connecting to the TANDBERG codec with multiple RS-232/Telnet/
SSH sessions, each session can define feedback individually.