TANDBERG Codec C90 D14128.02 - Manual (Page 16)

D14128.02—NOVEMBER 2008 16
Codec C90 System Integrator Guide
Contents Introduction Getting Started Interfaces About the API xConfiguration xCommand xStatus Cameras Appendices Contact us Interfaces
The front panel
There are four LED’s in the front of the Codec:
Power • – The POWER LED turns ON when power is connected,
otherwise OFF
Call • – The CALL LED turns ON when there are active calls on the
codec, otherwise OFF
Infrared • – The IR LED flashes when infrared signals are received
Alarm • – The ALARM LED turns ON when there is no connection to
the network, otherwise OFF
Power Call IR Alarm
(infrared)