TANDBERG Codec C90 D14128.02 - Manual (Page 113)

D14128.02—NOVEMBER 2008 113
Codec C90 System Integrator Guide
Contents Introduction Getting Started Interfaces About the API xConfiguration xCommand xStatus Cameras Appendices Contact us Appendices
The certificates upload procedure
Contact your system administrator to obtain the required files (.PEM format).
Upload certificates
The Upload certificates tab lets you upload a CA list
(ROOT certificate) to authenticate TLS connections
on SIP and a HTTPS certificate to enable HTTPS.
The system administrator issues/obtains and installs
unique certificates to each system.
For TLS connections a ROOT Certificate (CA-list) can
be uploaded from the web interface.
When the SIP setting TlsVerify is enabled, only TLS
connections to servers, whom x.509 certificate is
validated against the CA-list, will be allowed.
Go to: Settings > Administrator settings > Advanced
configuration > SIP > Profile > TlsVerify
To install a certificate, you need:
HTTPS certificate ( .PEM format) •
ROOT certificate ( .PEM format) •
Private key ( .PEM format) •
Passphrase (optional) •
How to upload the certificate
Open a web browser and enter the IP 1.
address to connect to the Codec C90
by HTTP.
Select the 2. Upload certificates tab
Click 3. Browse... and locate the
certificate files (.PEM)
Type in the 4. Passphrase
Click the 5. Upload button to start the
certificate installation.