The network status, Codec c90 system integrator guide – TANDBERG Codec C90 D14128.02 User Manual
Page 99

D14128.02—NOVEMBER 2008
99
Codec C90
System Integrator Guide
Contents
Introduction
Getting Started
Interfaces
About the API
xConfiguration
xCommand
xStatus
Cameras
Appendices
Contact us
xStatus
xStatus MediaChannels Call [1..n] OutgoingVideoChannel [1..n] ChannelRole
Main video channel or presentation video channel.
Value space:
Main/Presentation
Default value:
N/A
Example:
*s MediaChannels Call 11 OutgoingVideoChannel 185 ChannelRole: Main
xStatus MediaChannels Call [1..n] OutgoingVideoChannel [1..n] Video Protocol
Video algorithm.
Value space:
H264, H263pp, H263, H261
Default value:
N/A
Example:
*s MediaChannels Call 11 OutgoingVideoChannel 185 Video Protocol: “H264”
xStatus MediaChannels Call [1..n] OutgoingVideoChannel [1..n] Video PictureMode
Do not use. Will be removed in next sw release.
Value space:
N/A
Default value:
N/A
Example:
*s MediaChannels Call 11 OutgoingVideoChannel 185 Video PictureMode:
AUTO
xStatus MediaChannels Call [1..n] OutgoingVideoChannel [1..n] Video ResolutionX
Resolution width for incoming video.
Value space:
Integer value.
Default value:
N/A
Example:
*s MediaChannels Call 11 OutgoingVideoChannel 185 Video ResolutionX: 768
xStatus MediaChannels Call [1..n] OutgoingVideoChannel [1..n] Video ResolutionY
Resolution height for incoming video.>
Value space:
Integer value.
Default value:
N/A
Example:
*s MediaChannels Call 11 OutgoingVideoChannel 185 Video ResolutionY: 448
The Network status
xStatus Network 1 Ethernet MacAddress
Mac address for ethernet interface.
Value space:
S: 0..100
Default value:
N/A
Example:
*s Network 1 Ethernet MacAddress: “00:50:60:02:FD:C7”
xStatus Network 1 Ethernet Speed
Speed in Mbps. Full or half duplex.
Value space:
Integer value
Default value:
N/A
Example:
*s Network 1 Ethernet Speed: “100full”
xStatus Network 1 IPv4 Address
Ip address of this system.
Value space:
S: 0..100
Default value:
N/A
Example:
*s Network 1 IPv4 Address: “10.47.21.62”
xStatus Network 1 IPv4 SubnetMask
A mask used to determine what subnet the IPv4 address belongs to.
Value space:
S: 0..100
Default value:
N/A
Example:
*s Network 1 IPv4 SubnetMask: “255.255.255.0”
xStatus Network 1 IPv4 Gateway
To be described
Value space:
S: 0..100
Default value:
N/A
Example:
*s Network 1 IPv4 Gateway: “10.47.21.1”