TANDBERG Codec C90 D14128.02 - Manual (Page 8)

D14128.02—NOVEMBER 2008 8
Codec C90 System Integrator Guide
Contents Introduction Getting Started Interfaces About the API xConfiguration xCommand xStatus Cameras Appendices Contact us Getting Started
Getting started
In this chapter...
Assemble your system
Using the remote control
Turn on the system
Verify IP address settings
Setting a static IP address
Add the system to the network
Verify your settings
Time zone settings
About monitors
Chapter 2
This chapter introduces you to the codec
and gets you up and going.
This guide has been divided into several
chapters, all of which provide different
information. You can access the chapters
directly by clicking on the menu bar at the
top of this page.