TANDBERG Codec C90 D14128.02 - Manual (Page 77)

D14128.02—NOVEMBER 2008 77
Codec C90 System Integrator Guide
Contents Introduction Getting Started Interfaces About the API xConfiguration xCommand xStatus Cameras Appendices Contact us xCommand
xCommand Preset Activate
Activate local preset. Will move camera to predefined position.
Required parameters with ( r ):
PresetId( r ): <1..15>
Example:
xCommand Preset Activate PresetId:3
OK
*r PresetActivateResult (status=OK):
*r/end
xCommand Preset Clear
Delete a preset storing a camera position.
Required parameters with ( r ):
PresetId( r ): <1..15>
Example:
xCommand Preset Clear PresetId:3
OK
*r PresetClearResult (status=OK):
*r/end
xCommand Preset Store
Store current camera position. System may hold 15 predefined camera positions (presets).
Required parameters with ( r ):
PresetId( r ): <1..15>
Type( r ): <All/Camera>
Description( r ): <S: 0, 255>
Example:
xCommand Preset Store PresetId:3 Type:Camera Description:”Left view”
OK
*r PresetStoreResult (status=OK):
*r/end
The Preset commands