The camera commands, Codec c90 system integrator guide – TANDBERG Codec C90 D14128.02 User Manual
Page 69
D14128.02—NOVEMBER 2008
69
Codec C90
System Integrator Guide
Contents
Introduction
Getting Started
Interfaces
About the API
xConfiguration
xCommand
xStatus
Cameras
Appendices
Contact us
xCommand
xCommand Camera BestView
Activate the best view function.
Required parameters with (
r
):
CameraId(
r
): <1..7>
Duration: <0..65534>
Example:
xCommand Camera BestView CameraId:1 Duration:7
OK
*r BestViewResult (status=OK):
*r/end
xCommand Camera CameraUpgrade
Upgrade camera software.
Required parameters with (
r
):
CameraId(
r
): <1..7>
Filename(
r
): <S: 0, 128>
Example:
To be described.
xCommand Camera DirectIRControl
Camera is controlled directly from remote control. Camera does not receive control signals from codec.
Required parameters with (
r
):
CameraId(
r
): <1..7>
OnOff(
r
): <On/Off>
Example:
xCommand Camera DirectIRControl CameraId:1 OnOff:on
OK
*r DirectIRControlResult (status=OK):
*r/end
xCommand Camera PanTiltReset
Camera pan/tilt values is positioned to predefined value.
Required parameters with (
r
):
CameraId(
r
): <1..7>
Example:
xCommand Camera PanTiltReset CameraId:1
OK
*r PanTiltResetResult (status=OK):
*r/end
The Camera commands