VXI VT1422A - Manual (Page 50)

50 Field Wiring Chapter 2
Wiring and Attaching the Terminal Module
Figures 2-13 and 2-14 show how to open, wire and attach the terminal module to a
VT1422A.
5 mm
secure wires.
wire exit panels.
Remove 1 of the 3
Remove and Retain Wiring Exit Panel
and release.
Tab
Tighten wraps to
(Screw Type)
B. Press tab forward
A. Release screws.
Use wire size 20-26 AWG
Depress terminal lever(s). Insert
wire(s) into terminal(s). Release levers.
Make Connections (Spring Clamp)
Remove Clear Cover.
(Shipped with Terminal Module)
Special tool P/N 8710-2127
0.2"
Insert wire into terminal.
Tighten screw.
VW1 Flammability
Rating
5 mm
0.2"
size 16-26
AWG
Use wire
Route Wiring
1 2
3
4
Figure 2-13. Opening and Wiring the VT1422A’s Terminal Module