Vidikron Vision 75 - Manual (Page 22)

Controls and Functions
6 Vidikron Vision Model 65/Model 75 Installation/Operation Manual
5. POWER/STANDBY LED
Indicates power status as follows:
• Orange when the projector is in standby mode
• Flashes green for approximately 45 seconds after the projector is turned on to indicate
that the lamp is warming up
• Green during normal operation
• Flashes orange for approximately 110 seconds after the projector is turned off to
indicate that the lamp is cooling down
• Red when an internal failure requiring service has occurred
6. TEMP LED
Indicates fan status and internal temperature as follows:
• Off during normal operation
• Red when internal temperature is too high or a fan failure occurs
7. INTAKE VENT
8. VIDIKRON LOGO
The logo can be rotated to match the projector
orientation: inverted (ceiling-mounted) or upright.
To rotate the logo, grip it at the sides, pull it away
from the projector and rotate it 180 degrees.
9. FRONT IR SENSOR
10. PROJECTION LENS
To adjust the focus, grasp the lens by the outer ring and rotate it.