Picture memory, Copy settings, Brightness – Vidikron Vision 75 User Manual

Page 63: 2. typical pluge pattern for adjusting brightness

Advertising
background image

Operation

Vidikron Vision Model 65/Model 75 Installation/Operation Manual

47

Picture Memory: For each input, the Vision 65/75 lets you store picture quality settings as
presets that you can recall at a later time. You can create up to four presets per input and
resolution, to accommodate changing lighting conditions or viewer preferences.

To select a picture memory preset, highlight Picture Memory in the Picture Adjust menu.
Then, press

or

to select “Custom 1,” “Custom 2,” “ISF Night” or “ISF Day.” When you

select “Custom 1” or “Custom 2,” any changes to picture quality settings are stored in the
selected preset.

Copy Settings: When you select the “Custom 1” or “Custom 2” Picture Memory preset, you
can copy the settings from another preset to the selected preset. This gives you a convenient
starting point for creating a new, custom preset. To do this, select Copy Settings from the
Picture Adjust menu and press

. Then, choose “Custom 1,” “Custom 2,” “ISF Night” or

“ISF Day.”

Brightness: On your external test pattern source, select a PLUGE pattern. (PLUGE is an
acronym for “Picture Line-Up Generation Equipment.”) Figure 4-2 shows a typical PLUGE
pattern.

Figure 4-2. Typical PLUGE Pattern for Adjusting Brightness

PLUGE patterns vary but generally consist of some combination of black, white and gray
areas against a black background. The example above includes two vertical bars and four
shaded boxes.

1. To store changes to the ISF Night or ISF Day Picture Memory preset,

select that Picture Memory in the ISF menu (refer to ISF on page 59).
You must enter a passcode to access the ISF
menu.

2. The Picture Memory selection you make here is not retained when the

projector is powered off, then on again. To specify which Picture
Memory
should take effect when the projector is powered on, select it
in the ISF me
nu.

To copy changes to the ISF Night or ISF Day Picture Memory preset, select
that Picture Memory
in the ISF menu (refer to ISF on page 59). You must
enter a passcode to access the ISF me
nu.

Note

Note

Below Black

Above Black

Advertising
This manual is related to the following products: